Description

Resimac’s 511 UCEN is a two-component, solvent-free epoxy novolac coating suitable for application to metallic and primed concrete surfaces. The coating once cured can withstand permanent immersion conditions in full strength inorganic acids and chemicals up to 113℉ / 45℃. Typical chemicals this product can withstand include 98% sulphuric acid, 36% hydrochloric acid & 75% phosphoric acid. The coating can be applied by brush, roller, or standard airless spray and has been used across all industries for long-term chemical attack protection.

Applications

Chemical Containment

Concrete Repair

Floor Resurfacing

Metal Repair

Additional information

Weight	8.8 lbs
Application	Must be applied as a 2 coat system to properly prepared surfaces Applied by brush, roller, or spray Two coats at a thickness of 400-500 microns WFT per coat
Uses	Chemical storage tanks Structural steel Internal pipeline surfaces Containment areas Process flooring and vessel surfaces
Coverage	At 400-500 microns, theoretical coverage rate of 2-2.5m² per ltr per coat.
Immersion Temperature Resistance	Up to 113℉ / 45℃
Sag Resistance	Nil at 500 microns
Usable Life	10°C – 50 minutes 20°C – 25 minutes 30°C – 12 minutes 40˚C – 6 minutes
Minimum Overcoating Time	10°C – 8 hours 20°C – 4 hours 30°C – 2 hours 40˚C – 1 hour
Maximum Overcoating Time	10°C – 24 hours 20°C – 12 hours 30°C – 6 hours 40˚C – 3 hours
Water/Seawater Immersion	10°C – 8 days 20°C – 4 days 30°C – 2 days 40˚C – 1 day
Chemical Immersion	10°C – 14 days 20°C – 7 days 30°C – 3.5 days 40˚C – 1.75 days

Resimac 511 UCEN

Description

Applications

Additional information